Re: Supercharger Suggestions |
Subject: Re: Supercharger Suggestions by AKS_Racing on 2011/11/4 1:26:57 Sorry about the late response, but have been away. Headed out to tour Latin America again next week. I ran the FelPro gaskets with ARP bolts for a long time with great success (18 psi). I also ran right at 9.6:1 SCR. My current combo runs ARP studs with just over 9.3:1SCR and I am just slightly over 3Bar, and yes, I am running just a bit blind during certain times of the year. I will agree with much of what is posted above, the tune needs to be close to correct all the time when you are running the higher SCRs. You could be far more lax with the tune if you started with a lower SCR. But you would also have a lazy car, off boost. Build the combo with boost that starts to come in at the lowest RPM possible and tune for that combo. I do not have any brackets, but am more than willing to share my expertise for others to follow the same path to run boost without belt slip. ProCharger has options that make this a reality. |