Re: Clutch master and slave cylinder help |
Subject: Re: Clutch master and slave cylinder help by ttpfi on 2011/12/27 12:16:40 I got the slave in from rockauto.com. I found an easy way to get the nuts back on the slave studs. I took the socket and streched a latex glove over the socket, then pushed the nut into the socket. This gave enough friction to hold the nut in the socket. Took a 1x2 piece of wood, used that to push and hold the slave on the studs. Took the socket and hand tightened the nuts on the slave. Then torked down the nuts. Bled the system and got a good hard pedal. Took all of about 45 minutes. |