| RE:Did a code check |
Subject: RE:Did a code check by BillH on 2008/1/7 16:31:18 On the 92, almost everything will show up as an "H" except tha C12 (no codes). I think this happens when you shut off the key and any codes get stored. In module 9, the H63 is Valve Solenoid Relay Fault ( Valve Solenoid Circuit Error on Andy's sheet, same thing). Yep, looks like that will trigger the ASR/ABS lites. When the ign is on, this realy provides voltage to activete the solenoids and provides a ground path for the "service abs" lamp. Service ABS and service ASR lites will be on and a code 63 will be set when the Valve Solenoid relay voltage falls to less that 5 volts. I'd first try and reset that code, go to 9.7 to reset, and see if it comes back and the lites go out. If not, BURN the Chilton. The diagnosis is on page 5E1-82 in the real manual. BTW, I want your wheels for my Black Rose. |
