Re: Jack & jack stand placement. |
Subject: Re: Jack & jack stand placement. by BillH on 2012/2/13 15:14:05 To get most floorjacks under the front crossmember, you need to raise the front end of the car up a bit. The easy way is to use a 6-8 inch piece of 2x6, 2x8, etc. Cut the 2x8 on a 45 degree to make it easier to drive up on to. And, these tend to slide a bit so if you mount the 2x8 on a longer piece of plywood (like 18 inches), pulling on to the plywood will hold everything in place. I can post a pic if anyone wants it. |