| Re: New Electric Plug |
Subject: Re: New Electric Plug by dan0617 on 2012/2/15 12:57:27 I'm not sure any of my plugs on my car have any locking tabs left. Nothing a bag of wire ties can't fix! I think on most plugs if you look down in the end of them you can see a tiny tab that holds the wire in by holding the metal tab that is on the end of the wire. Take a tiny screwdriver like used on glasses, and push the tab. That should release the wire. Make sure you know which wire goes in which hole, write it down. Then remove the wires from the new plug the same way, then insert the wires you removed from the original plug into the new plug.....This way you have a new plug on your old wires, no soldering or butt connecting (lol) or splicing. A quick search on the internet will likely show you some pics. |
