Re: vacuum @ v/c = ntake manifold gasket leak |
Subject: Re: vacuum @ v/c = ntake manifold gasket leak by dan0617 on 2012/3/2 14:49:29 I use the Felpro intake gaskets. I spray the backside of them with copper spray gasket material, let them sit for about 2 minutes, then stick them to the heads. Let them sit another minute, then install intake. Never had a problem doing it that way, the sticky spray gasket keeps them from moving when you gently place the intake. 2 thin coats of the spray gasket is all it takes, 1 can will last you for about 50 installs. |