Re: Vibration.... IS GONE!!!! |
Subject: Re: Vibration.... IS GONE!!!! by bogus on 2012/8/2 14:19:31 More than likely, Brad, they came from Dana as a preassembled and balanced component. As for the half shafts, they are a known week point when racing. Specifically drag racing. I have seen pictures of these things literally twisting themselves in half. And yes, the welds are a bit sketch from time to time, but for the most part, they are not the failure point. I have seen many more examples of the shafts themselves twisting apart than the welds failing. Realize one thing, with an IRS setup, you still need a weak spot. The stronger the rear end, the more chances things like the main prop shaft or even the trans/clutch will break first. |