Re: Newbie Questions.. |
Subject: Re: Newbie Questions.. by BillH on 2013/1/19 0:38:22 Yea, nice car. You can do a disgnostic check by jumping pins 4 & 8 on the ADL connector. The pinout on the TOP row is; 1 2 3 4 5 6 7 8 And the PKE diagnostic system works as follows: With pins 4 and 8 connected, the PKE light in the Driver Info Centre will flash the codes. Here is the list of DTCs and what they mean: DTC #12: Receiver Memory Bad DTC #13: Transmitter Not in Range DTC #14: Non-Valid Transmitter Received DTC #15: Valid Transmitter Received DTC #16: Passenger Door Button Depressed DTC #17: Hatch Button Depressed Good Luck BTW, If you don't have a Factory Service Manual - get one. It's impossible to work on your car without one. |