RE:Where to get heim rod ends? |
Subject: RE:Where to get heim rod ends? by BillH on 2008/2/7 15:21:01 Quote: Received the Speedway parts last week and installed them last night. No feedback on how they last will be available until this summer, however. One concern is that I had to insert a reducer bushing (3/4" to 1/2") in each one and in one end the bushing was loose. The other was a slight interferance fit as expected. I wonder if that will translate into slop on the track. That's strange. The rod end holes should have a very tight tolerance. Were the bushings fabricated or just made out of tubing? I don't use many spacers, mostly use hats. But you can take a hat out of the rod end hole and put it on the other side of the hole and there's no play. |