Re: opinion on scat 383 forged rotating assembly |
Subject: Re: opinion on scat 383 forged rotating assembly by PeteK on 2013/11/22 23:53:14 Crank and rods are decent. Closely inspect the thrust surface of the crank. Every now ant then Scat leaves them rough, and they chew up the thrust bearing. It's been years since I ran across it, but it costs nothing to check it. Rods are decent, but will likely be 2-5 tenths tight. Have the big and small ends checked. As Matt said, don't trust the balance. Have it spun locally to verify. |