Re: No Start |
Subject: Re: No Start by vetteoz on 2013/12/30 0:27:58 Quote:
If VATS is programmed out in the tune on a SD car, the ECM will not look for the required fuel enable signal from the CCM ; exactly the same as happens with the VATS delete on earlier MAF cars with the standalone VATS module In any case ,you have to manually bypass the VATS operated starter enable relay to fully remove VATS from the car Resistors only work to "fool" VATS into thinking the correct key is being used.If there is a fault with the VATS system itself , the resistors will do zilch |