Re: 700r4 to T56 |
Subject: Re: 700r4 to T56 by 383tpimachine on 2014/6/7 21:24:49 More happy happy fun time. Started today by taking out the steering column. SO MUCH MORE ROOM. Should have done that earlier. Took out the gas pedal to upgrade the mount to the metal one I got here a few months back. From here I took out the brake pedal and began test fitting the clutch bracket. Had to cut away some plastic liner and fluff. Used a scribe to punch a hole to mark the master cylinder and bolt hole positions. Had to move the cruise control to the side for a bit to use a airratchet fitted with a bit to cut the hole BUT: IT IS IN. Pedals all installed except the gas. Oh and Trans is IN completely. Driveshaft back in place with a new yoke. Next is to put the steering column back in, remount the gas pedal and rebuild the interior. Need to do: Mount slave, retrofit hydraulic line, mount shifter and have boot made. |