Re: Sagging headliner repair, glasstop removable screen [snsappics]... |
Subject: Re: Sagging headliner repair, glasstop removable screen [snsappics]... by Schrade on 2014/10/23 18:49:09 Glued into place. This is some styro-board that I put additionally on my OEM pad, for strength, and to try to kill some exhaust drone in the interior; After it dries, flip it, and cut excess material so that there's about 3" of overlap. Dry-fit the overlap the rest of the way around. The forward corner concave curves are tricky, where the outline curves INWARD. I made 2 cuts in the apex of the concave curve, to about 3/8" of the edge (2nd edit - you need to cut to about 1/16" in the front concave corners - I got a buckle from not cutting close enough; see snappics posted below): |