Re: Removing gastank |
Subject: Re: Removing gastank by SpectatorRacing on 2015/3/24 15:51:36 INSTALLATION 1.Position tank on frame extension and secure to tank supports with straps. 2.With the aid of an assistant, install tank and frame assembly in vehicle and secure with bolts. 3.Install nuts on right and left vertical retainers. 4.Install 3 nuts securing each side of fascia to horizontal body retainer. 5.Install screws securing bottom edge of fascia energy absorber pad. 6.Install all rear lamps and spare tire lamp. 7.Install fuel tank cable to stabilizer shaft brackets. 8.Install bolt securing fuel vapor pipe to left hand fuel tank strap. 9.Connect antenna ground strap. 10.Install both rear inner fender panels. 11.Install both inner fender braces. 12.Install exhaust system. 13.Connect oxygen sensor electrical connector. 14.Install spare tire and carrier. 15.Lower vehicle. 16.Install bolts securing fascia to impact bar. 17.Install license plate. 18.Connect fuel feed hose, fuel return hoses, vapor hose and fuel meter electrical connector. 19.Install fuel tank filler neck housing and drain hose. 20.Install fuel tank filler door. 21.Connect battery ground cable. 22.Add fuel to tank. |