Re: Need to brainstorm the FAST conversion |
Subject: Re: Need to brainstorm the FAST conversion by hcbph on 2015/12/28 12:32:25 Quote:
Having worked on a truck with a non-original brand engine in it many moons ago, my suggestion is leave the wiring in it for now. Unhook and mark each wire but leave it intact till such time as you get everything worked out. Once it's all good then you can start removing wires if that's your desire. Better to have them around in case it turns out one happens to be required and if you've removed it then it's a lot of extra work to undo it. My 2 cents. |