Re: Milodon High-Flow Thermostat |
Subject: Re: Milodon High-Flow Thermostat by joeld on 2017/4/9 2:57:12 Actually this is the same thermostat that was in the motor before the pump change, and I did drill 2 holes in before install about 4 years ago. And yes car was on ramps that I have been using for the last 20 years, (4) four stacks of 2 x 8's. I've been wanting to change the thermostat to a 180* just because of the fan cut on/off changes I made several years ago. 215*\199* . I'll just go ahead and change the thermostat next week and start from scratch on the bleed. Thanks Joel Just looked at that Lisle 24680 funnel, nice tool! |