Re: Window in 87 won't move, stuck in up position |
Subject: Re: Window in 87 won't move, stuck in up position by lunytnz on 2017/8/26 6:47:04 I bought a used regulator off a 93. I got past most of the typical sticking points, but really struggled with getting the regulator out of the door. I thought sure I'd find some video that would show how to do it, but no luck. This page gave me a clue: http://webpages.charter.net/khasting/ ... g/techinfo/windowreg.html I believe what I showed in the picture is where the gear was attached (likely welded, as far as I can tell) to the frame (but broke apart). So, even though the motor was all the way down, the frame was rising all the way to the top because of the spring. I think that was making it really hard to 'tip' the regulator toward the back of the door. I pulled the frame down by hand and was finally able to get the regulator out... whew! |