Become a Fan!
Login
Username:

Password:

Remember Me

Lost Password?

Register now!
Main Menu
Who's Online
171 user(s) are online (128 user(s) are browsing Forums)

more...
Guru Dictionary
Print in friendly format Send this term to a friend  TH400
Automatic Transmission - 3 Speed

1st Gear: 2.48
2nd Gear: 1.48
3rd Gear: 1.00

- Used in production GM models from 1964 thru 1990.
- 13 Bolt ...
Supporting Vendors
Platinum
Mid America Motorworks
Mid America Motorworks FREE CATALOG


Gold
FIC 770-888-1662


Registered Vendors
Guru Friends
Supporting Banners

TIRERACK.com - Revolutionizing Tire Buying


Shop for Winter Tires Now!




Support This Site
Report message:*
 

RE:Oil Temp Warmup...

Subject: RE:Oil Temp Warmup...
by BillH on 2008/2/19 17:06:34

Yesterday, when I started the 92, the water was at 40. I didn't look at the oil but, it was probably anround 40. I always run idle to 100 degrees water before I even move the car. That takes 5 to 7 minutes. At 100 water, the oil temp was 53 ( on the digital because the analog gauge is never even close to what the digital says). If I curse slowly the 2 miles out to the highway, the water is at 150 and the oil may get to 100.

So, if you're idling for 10 min. in the garage, you just have about enough oil temp to move the car and put a little load on the oil by driving. I thing this is especially important since you have a new motor and the clearances are still a little tight. Just my opinion.

We have a vintage Nascar with really tight tolerences in the 750 hp smallblock. The oil gets preheated to 140 every time before we start it.
CorvetteForum.guru is independently owned and operated. This site is not associated with or financially supported by General Motors.

Copyright 2008-2015 CorvetteForum.guru

CorvetteForum.guru is a Guru Garage Site (Coming Soon!)

If you have any questions about our site, please contact us at Andy@corvetteforum.guru.

Powered by XOOPS 2.56 Copyright 2001-2014 www.xoops.org

Hosted by GoDaddy.com.