RE:!/2 Turn or 1/4 Turn? |
Subject: RE:!/2 Turn or 1/4 Turn? by dan0617 on 2008/2/26 20:38:12 I've heard they suggest 2 full turns. I think that is too much. Too close to the bottom of the lifter in my opinion, then if you do have a lifter pump up at high rpm's you are risking piston to vavle clearance. I was going to go with 1/2 turn but decided to do 1 full turn. Next time the rockers are off I want to try 1/2 turn but I had so many variables this time with swapping everything above the block including the full ignition system I really wanted to go with a preload I had ran previously with the same lifters. So far so good. |