| RE:Drip tabs and GMPP 1.6 rockers. |
Subject: RE:Drip tabs and GMPP 1.6 rockers. by biggrizzly on 2008/3/1 22:39:30 I just removed mine from my valve covers not 1 hour ago. I used a stout pair of plyers to break them off. I also had to use a dremel with a barrel sander on it to relief those walls of the breather baffles because the fulcrum of the rocker was just touching them a bit. The tabs snap off easily. Travis, since you have LT1 covers you won't be doubling gaskets or anything. L98 guys and LT1 guys do slightly different things on vlave covers. Install your rubber gasket dry on the LT1 |
