Re: D36 Question |
Subject: Re: D36 Question by Matatk on 2008/7/23 13:27:04 I've been looking into this because I want to change rear gears. The outer dimensions are the same. Some have said the earlier D36s might have different bolt sizes, because one guy had to drill out the mounting holes for the bolts he had. I haven't confirmed that. On the inside, there are 2-series and 3-series gears (if you have a 2.59, 3.07, etc) These are not interchangeable because of the thickness. For the 2-series to get aftermarket gears, you need "thick ring" gears. You can't swap a stock 3.07 into a stock 2.59. I haven't found after market thick 3.07s, only aftermarket thick 3.54 and 3.73s. Because of that, I'm looking for an entire stock 3.07 to bolt in. I'm no expert in this, hope my basic description is a start. Matthew |