Subject: Re: 89 LT1 won't stay running by bam on 2011/9/5 22:12:32
My 93 LT1 did the same thing, start fine, run about 15 min then die, not start until engine cool, is that similar to what you are experiencing? For mine it was the connector to the coil module. I touched and wiggled it while the engine was running, it would die instantly. I opened the connector and bent the pins slightly and it was fixed. Might try that, nothing to lose. Also wiggle other connectors in the engine bay, it may be another one, but I would bet it's the coil or module connector. Good luck.
