| Re: Determining optimal valve adjustment after start-up |
Subject: Re: Determining optimal valve adjustment after start-up by dan0617 on 2008/9/28 15:05:33 I went 3/4 past 0 lash on mine. Have yet to have a reason to pull the valve covers back off so I haven't re-checked them. My roller rockers are a little noisier than expected but I don't have that nasty clacking or anything. I think anywhere from 1/4 turn to 1 turn will give you the same identical results but if you only go 1/8 turn then you better be exact on finding 0 lash. |
