Re: New LTX running well but..... |
Subject: Re: New LTX running well but..... by rklessdriver on 2008/10/22 19:10:53 Quote:
Yes. It currently has one one it. That's why I'm going for changing the valve springs first. Seems easier than pulling the intake and Rev Kit and lifters. The bad thing is I shouldn't have to change anything. The motor ran fine on the dyno right before I put it in the car. Plenty of other engine builders are running way more spring pressure on these Morel lifters (I only have 150lbs/400lbs). Of course the oil got diluted bad with fuel from idling it around on 36lb injectors with the stock tune, but I changed it before I dropped the car off with ED to get tuned. Maybe the lifters got damaged from that. I'm hoping the lighter spring pressure will bring them back, but if not I'll be replacing the lifters next... Will |