Re: 84 auto-manual swap |
Subject: Re: 84 auto-manual swap by subtleZ28 on 2009/2/9 3:51:48 Quote:
The mounting bolt orientation is wrong. Also the vette set up mounts flat on the firewall, where the f-body master has an angled mounting surface. I believe I read a vette master will work w and LS1/T56 hydraulic throw out bearing if a special line is fabricated to link the two. Hopefully the vette master or an aftermarket will fit the pedal set up and have the proper volume for the bearing. Any input on that would be appreciated! |