Re: 86 vette switching an auto trans to a manual transmission |
Subject: Re: 86 vette switching an auto trans to a manual transmission by Flashman on 2009/6/22 22:52:34 Hi, Yes. But lets see where that shifter ends up when I cut the hole in the tunnel. It should not be off by much. The shift rods pretty much dictate where the shifter will mount. Up too high or low, right or left will bind the shift rods. I slotted some of the mounting holes so I have room for minor adjustments. I hope this transmission is ok. I pulled the side cover on the T-10 and the gears look like new. I am gonna pull the pan on the overdrive, check to see if the fluid is burnt, new filter and gasket. I will keep you posted. Joe Flash |