so what is the best speaker/amp config for me?? |
Subject: so what is the best speaker/amp config for me?? by -=Jeff=- on 2012/4/17 19:40:58 which would be better for me? full active or Semi Active? Full active is better but due to my equipment and power I am not sure.. here is what I have Nakamichi CD400 two Arc KS 300.4 Front Stage: 1" Tweeter 4" Mid, 6.5 Midbass Rear: 6.5 woofer (might swap to an 8") Current setup has one amp bridged to the rear and one amp bridged to the front with a 3-way Passive Crossover I have a XM6 which will give me the last piece to go active in one of 2 ways: Active Option 1: Amp 1 2 channels to a 2-way passive for the 1" and 4" (I have a set of 2 way passives) 2 channels for the 6.5 midbass Amp 2 Bridged for the Woofers Active Option 2: Amp 1 2 channels for 1" tweeters 2 channels for 4" midrange Amp 2 2 channels for 6.5 midbass 2 channels for Woofers Active Option 1 uses the XM6 for crossover duty Active Option 2 uses the XM6 as well as the croosovers on the Arc for the midrange and midbass as well as the XM bandpass. AMP Specs: Power output RMS @ 4 ohms 4 x 90 watts Power output RMS @ 2 ohms 4 x 175 watts Power output RMS @ 4 ohms bridged 2 x 350 watts 3rd Active Option: a/d/s PH15 (6x60) 2 channels to a 2-way passive for the 1" and 4" (I have a set of 2 way passives) 2 channels for the 6.5 midbass 2 channels for Woofers then Sell the 2 ARC Audio Amps Thoughts and/or opinions? |