| Complete install in a 1992 C4 |
Subject: Complete install in a 1992 C4 by Ajetsprt on 2009/4/12 2:50:11 Hi, I just got a 1992 C4 Coupe and want to upgrade the audio system. The stereo in the vehicle is the stock Delco Bose Gold Series AM/FM Cassette. If I am going to run all new wiring can I just unplug the two jacks on the back of the unit, remove the unit and then install the new head unit & run the wires or do I need to do anything else to stop any display alarms from going off? I also see that Metra Electronics offers a couple wiring harness kits. Since I am going to run new wiring for speakers I would not need those leads but I could use the power leads off the Metra kit. If I use one of the Metra kits would that illiminate any display alarms? Any idea which kit I would use? PART NUMBER 70-1855 Description: Tuner relocation harness Product Specifications: -Tuner bypass harness -60" long -Includes antenna extension and adapter -21-pin plug Allows installation of an aftermarket radio using the existing factory wiring and connectors. No cutting of factory wiring is needed. This particular harness bypasses the remote tuner in certain GM vehicles. PART NUMBER 70-1856 Description: Tuner relocation harness Product Specifications: -Tuner bypass -Includes antenna extension -17 ft long -21-pin plug -For non-BOSE systems only Allows installation of an aftermarket radio using the existing factory wiring and connectors. No cutting of factory wiring is needed. This particular harness bypasses the remote tuner in certain GM vehicles. PART NUMBER 70-1857 Description: Tuner relocation harness and Bose integration harness Product Specifications -Retains factory BOSE system -Bypasses factory tuner -Includes antenna extension -21-pin plug Allows installation of an aftermarket radio using the existing factory wiring and connectors. No cutting of factory wiring is needed. This particular harness bypasses the remote tuner in certain GM vehicles while allowing the factory BOSE system to still function. Thanks... Jim |
