Re: Superram |
Subject: Re: Superram by rklessdriver on 2012/6/8 1:54:53 Looks like they used play sand to blast it... which is what I use in mine for steel/cast iron and it does an OK job on alum as well but you get the appearance you have now.... they also never should have blasted it directly into the ports.... When you get back from the power coater it should have been heated up enough (to cure the paint) to expand the metal and get most of it out of the ports. I reckon you said that you were going to port on it a little anyway so that'll get it out of the ports for sure.... Until you drop it off with the powder coaster be careful touching it with your bare hands because the oil will contaminate the surface and they will have to re-blast it. Will |