| Re: Couldn't find one so I made one |
Subject: Re: Couldn't find one so I made one by Raidmagic on 2011/2/20 15:50:18 Quote:
An LS3 is my dream motor but my dreams are bigger than my wallet. On the motor mounts I used the plates from Speedhound and my stock mounts and frame mounts. Pretty much a bolt in. That did cause the motor to sit forward a little so I had to slot the C-beam holes. On the headers Melrose makes a great header, they bolt right up no issues tons of clearance. They fit as nice as the ones I had for my L-98. Now I didn't use the stock LS ac set up, I haven't even looked to see if it would fit. I'm going with and aftermarket air system. I could see the need for a custom set up if you used the stock ac compressor. |
