Forums - CorvetteForum.guru

Re: Couldn't find one so I made one

Subject: Re: Couldn't find one so I made one
by Raidmagic on 2011/2/20 15:50:18

Quote:

biggrizzly wrote:
What motor mounts did you use and did you have to do any custom fabrication to the right side header? I looked over a 1995 Corvette LS transplant at my car show last year and he had to have a custome header made for the right side and had to find different motor mounts. Just curious, that would be cool to have an LS3 in a C4

An LS3 is my dream motor but my dreams are bigger than my wallet.
On the motor mounts I used the plates from Speedhound and my stock mounts and frame mounts. Pretty much a bolt in. That did cause the motor to sit forward a little so I had to slot the C-beam holes. On the headers Melrose makes a great header, they bolt right up no issues tons of clearance. They fit as nice as the ones I had for my L-98. Now I didn't use the stock LS ac set up, I haven't even looked to see if it would fit. I'm going with and aftermarket air system. I could see the need for a custom set up if you used the stock ac compressor.

Stingray