67 Steering Column |
Subject: 67 Steering Column by BillH on 2016/10/2 22:28:25 Pics: 1. Shows all the parts, the column, hub and turn signal switch housing were glass beaded then painted factory (2 different colors of black. 2. The lower bearing - goofy stepped design, only used on the first 9,000 or so cars. The 2 bearings were $95 but those and one C-clip were all I had to buy. The plastic turn signal components were in extremely good condition. 3 & 4, A pile of those blue wire splices that bubba had used to crap up the harness (didn't know how to run the wires correctly). Soldered & heat shrinked. 5. Lower bearing & retainers. 6. Finished |