Subject: by Trae1976 on 2009/2/17 15:43:09 Im no electrical expert, so maybe one of you can help. Last year I replaced my taillight and backup light bulbs with LED replacements, like those that SuperBrightLEDs offers. They work flawlessly and look great behind new lenses. :thumbleft: So then I wanted to replace my front turn signal bulbs, and thats when the issue started. At first, they would not work all would light up as if there was one missing, and no signal function. I assumed this was an issue with low resistance, so I replaced the standard flasher with a Tridon Electro-Mechanical unit. After that, they functioned properly, until I turned on the headlights, and they all lit up again with no signal function. So I then tried a different flasher I had read good things about a Signal-Stat #262 Heavy Duty Electronic. But Im still lit up with no function ... only with the headlights on.  Any ideas why? I know about the load resistors I can install, but I want to make sure thats what I need before I go splicing wires. Your input is much appreciated.  |
