Re: Corvette 1980 rear diff posidrive |
Subject: Re: Corvette 1980 rear diff posidrive by Matatk on 2018/3/6 21:40:39 Some more info I found online...not specifically mine. The 80-82 is a Dana 44 (I've seen it called a Super Dana 44) and it's specific to those years. These should be the torque values: These values are directly out of the GM Shop Manual for the 1980 Corvette: Pinion nut- 200-220 lbs. ft. Ring gear bolts- 45-60 lbs. ft. Bearing caps- 60-70 lbs. ft. Carrier front support- 65 lbs. ft. Carrier cover to frame- (sidemember bracket) 95 lbs. ft. Rear spring plate to carrier- 45 lbs. ft. Strut bracket to carrier- 30 lbs. ft. Camber Cam- 130 lbs. ft. Strut rod to spindle Support Attachment- 75 lbs. ft. Drive spindle nut- 100 lbs. ft. "Lubrication: To refill add 4 oz. of GM 1052358 additive or equivalent, then fill to level of filler plug hole with GM 1052271 or 1052272 or equivalent." |