| Re: Wheel Play |
Subject: Re: Wheel Play by Artsvettes on 2009/3/26 16:55:24 As usual the BS flows out of DB"s mouth. It is an incorrect way to check End Play in the bearings. 1 You need to jack up the vehicle 2 Remove the wheel and out board half shaft 3 Mount a dial indicator to torgue control arm and rest the pointer on the flange or spindle 4 Grasp the rotor and move it in and out axially in and out and observe the readings...........001-.008 limit The 6 and 12 rock will indicate excessively worn torgue arm bushing or stut arm bushings |
