| Re: 2017 Winter Upgrade/Update thread |
Subject: Re: 2017 Winter Upgrade/Update thread by rklessdriver on 2018/2/6 20:43:38 While waiting for the dyno schedule to clear out, we did some more fitting and fabrication to the car itself. Dropped the engine in place and built a bracket to mount the new remote water pump and fabricated the new -12AN lines from the engine to the pump. https://imgur.com/ZyV4JFx Fits in there real nice. Also put the new rear center section with the 4.30 gears under it but it looks just like the old one so no pics.... We still have to fabricate some support braces for the rear of the body as it's starting to crack on the rear quarter panel at the B pillar.... I think it's caused from a combo of the car hitting the rear bumper so hard a few times and the fact that we cut the rear deck out to fit the 3 link/straight rear under there. Also finishing up the re-wire as far as moving the battery up to in the front of the radiator.... had to get a remote relay for the battery cut off switch.... waiting on some cable ends and it will be complete. More to come as we complete it. Will |
