RE:Pics of my car and engine |
Subject: RE:Pics of my car and engine by dan0617 on 2008/2/17 0:01:11 It is a Holley Stealth Ram. The plenum was made by CF member makin U shiver, then sent to CF member ol'RJ to be welded together. It fit great, the only problem was the thermostat. I used a chrome swivel thermostat, and it is pretty high. I removed the IAC housing/water jacket from the bottom of the throttle body, then removed every ounce of metal from the water jacket of that piece. There are now 3 little torx bolts holding on just the IAC housing. Also, the drivers side lower throttle body bolt hit. I removed nearly 1/2" of the "bolt seat" on the throttle body for that bolt, then shortened the bolt. There is barely enough clearance, but it all works fine. I just cleared the codes and ran the car and have no codes, so I am pumped. The car runs wicked! I can't wait to try the nitrous, but the roads need to be clean and hot for that!! |