Re: Happy Day after Valentines day Chat.....2-15-16 |
Subject: Re: Happy Day after Valentines day Chat.....2-15-16 by BillH on 2016/2/15 18:22:25 Quote:
Yea, I guess. The MSD only lasted 20k. Changing the Opit's no big deal, it's the other crap. As usual, you have to change the Opti connector since the 92-3 connector fits the Caprice not the Corvette. Pulled out my Weller soldering gun that was only used 3 times, it wouldn't heat up. Went to HomeD, bought another Weller, soldered 2 wires and the tip broke (took it back). Finished the Opti, car ran fine. Let it sit 2 hours and restarted, got 2 codes and the SES light. Bad MAP sensor/circuit (connect Tech 1 to test ), did the generic testing, supprised that NAPA had a sensor in stock. Code 16 - Opti, low resolution. Thought my soldering might be the problem but, got the 5v. from the ECM and 0.26v probing the wire to the OPTI on the other side of the connector and got that back probing the connector. Going to bypass the connector with a jumper today but to fix it, I have to go borrow a soldering gun. |