Subject: Re: Toolaholics meeting....step inside. by RickAnthony on 2012/6/11 4:31:47
Quote:
Matatk wrote: If you need impacts, the HF ones are ok for really light work, but I've broken 3 of them recently on nuts that were really torqued down tight. That's why I bought the better set.
PS - we won't hold it against you if you give in to temptation.
I recently bought a set of Milwaukee M18 cordless impacts 1/2 inch, 3/8 inch and their drill.. I also have 3 batteries, a light and a charger all less then what snapon wanted for their 1/2 cordless impact by it's self with a battery and charger..
We have a set like that at the shop for re-threading.. I also bought one for spindles which worked really well for me on an old C3 I needed to clean the threads up on...
I also recently bought a Upper control arm press of e-bay (new) haven't used it yet but I know I will at some point, I'd like to do the upper control arm bushings on the nova next year.. there not really loose, but the rubber is coming out of them so they need to go....
