RE:Pics of some progress of the 67 |
Subject: RE:Pics of some progress of the 67 by cuisinartvette on 2008/2/21 1:52:43 Thanks... Final color is 06 Vette white, interior coca cola red. Originally white on red (bucket seats), just updated the colors. I wanted black with blue pearl but noone would paint it black. Besides, Im not a diligent waxer and having something stealthy and low maintenance is more up my alley. Ill apply permanenet undercoating via drag radials. Before its asked.... 358 cid -Pump gas motor -Scat 4340 crank -0 deck, 4 bolt, studded mains -Manley Sportmaster 6" rods/pistons, floating pins -Dart Conquest (early pro1 head) ported/angle milled by Tony Mamo, tops right around 302cfm -Team G with porting, angle milled -Solid roller 250/254@ .050, 280/286 adv. .670/.660 on a 110 by Tony -Crower sever Duty lifters -Jesel 1.6 shaft rockers -Dougs 1-3/4" headers Should idle around 12-1300, shift about 72-7400 -1/2" Polished stainless line from pickup to carb (learned about how to polish on this project) -1997 T56 trans -Centerforce DF clutch, billet flywheel with 14 lbs removed -4.11 rearend -SSM lift bars, boxed uppers, Edelbrock control arm braces, crossbrace I made & welded in rear to stiffen rear section... -Quick ratio steering, etc etc.... PS and PB only, no power windows or any of that nonsense. It should sit an inch or two lower when done with 295/50/15 in back I hope. |