RE:Need help finding part |
Subject: RE:Need help finding part by toptechx6 on 2008/1/27 23:20:28 I found a chart in my 93 FSM, section 3D, that indicates how many spacers to use above and below by part number matched to the spring. I don't remember seeing a part number on the spacers however so I don't know how to relate the part numbers to the thickness of the existing spacers. The other problem is the damned service manual only gives color codes for the springs (yellow or green) not the 3 letter code I'm familiar with. Sure would be nice if they standardized the descriptions. Maybe this will help. I just miked the the spacers that were installed on the spring when attached to the original suspension. Total thickness on top was .435, total on the bottom was .460. |