|
Register To Post |
#1
1990 Corvette Vacuum Hose and Cooling System Diagrams
Danspeed1
Posted on: 2014/10/21 4:36
Hello Everyone,
Trying to complete a project that is long overdue. Just a quick recap: back last year my father and I undertook a rebuild on a 90 Corvette. The car had been in a fire. The engine was trashed and everything was burnt up. Back in February of this year my father underwent surgery which took him off this project and I started a new 6 day a week job. During the summer we took turns attempting to complete the project but that only made things more complicated. The car looks like its 95% complete but I am not confident in the routing of the coolant hoses and have no idea how to route the vacuum lines. This is the last real piece of the puzzle holding us up. I know it will be difficult to determine if everything is correct on the car through. Hell, we have the car in front of us and we can't figure it out. But it is my hope some guru who has done a mini ram swap will be able to look at the coolant hoses and vacuum lines in the photos and let us know how we can complete this properly.
My father blocked off one of the coolant hoses with a bolt. He states that it doesn't go anywhere. I know if it is there, it must go somewhere. This concerns me. Also the routing of the hoses from the heater core to the coolant overflow tank and radiator concern me. I am not sure if they are connected correctly. As for the vacuum lines.... his guess is as good as mine. Don't know how to connect them up or what they are for. Please take a look at the photos below and let me know what you think.
Attached is also a ridiculous video. Couldn't figure out any other way to give you a proper overview.
Trying to complete a project that is long overdue. Just a quick recap: back last year my father and I undertook a rebuild on a 90 Corvette. The car had been in a fire. The engine was trashed and everything was burnt up. Back in February of this year my father underwent surgery which took him off this project and I started a new 6 day a week job. During the summer we took turns attempting to complete the project but that only made things more complicated. The car looks like its 95% complete but I am not confident in the routing of the coolant hoses and have no idea how to route the vacuum lines. This is the last real piece of the puzzle holding us up. I know it will be difficult to determine if everything is correct on the car through. Hell, we have the car in front of us and we can't figure it out. But it is my hope some guru who has done a mini ram swap will be able to look at the coolant hoses and vacuum lines in the photos and let us know how we can complete this properly.
My father blocked off one of the coolant hoses with a bolt. He states that it doesn't go anywhere. I know if it is there, it must go somewhere. This concerns me. Also the routing of the hoses from the heater core to the coolant overflow tank and radiator concern me. I am not sure if they are connected correctly. As for the vacuum lines.... his guess is as good as mine. Don't know how to connect them up or what they are for. Please take a look at the photos below and let me know what you think.
Attached is also a ridiculous video. Couldn't figure out any other way to give you a proper overview.
#3
Re: 1990 Corvette Vacuum Hose and Cooling System Diagrams
Schrade
Posted on: 2014/10/21 13:58
I have FSM for '90 - are you needing cooling system schematic, or vac line schematic? Both?
#4
Re: 1990 Corvette Vacuum Hose and Cooling System Diagrams
Matatk
Posted on: 2014/10/21 16:12
I am on my phone so can't inspect the pictures too well. I agree there should be no extra coolant hose with a bolt in it! Did you previously have and then delete the oil cooler option?
If you used the miniram, does that require a remote thermostat housing?
If you used the miniram, does that require a remote thermostat housing?
#5
Re: 1990 Corvette Vacuum Hose and Cooling System Diagrams
Danspeed1
Posted on: 2014/10/22 4:09
Quote:
Both Please! I have been looking online for quite a while and can't seem to find any schematics that help. That would be great. Thanks!
DG
Schrade wrote:
I have FSM for '90 - are you needing cooling system schematic, or vac line schematic? Both?
Both Please! I have been looking online for quite a while and can't seem to find any schematics that help. That would be great. Thanks!
DG
#7
Re: 1990 Corvette Vacuum Hose and Cooling System Diagrams
Schrade
Posted on: 2014/10/22 13:01
ID:
Looking for vac ATM...
#8
Re: 1990 Corvette Vacuum Hose and Cooling System Diagrams
Schrade
Posted on: 2014/10/22 14:08
WOW DS - NO vac schematic in Gen Info, OR ENTIRE Section 6 FSM for L98. LT5 is in there VIN J section, but NOT in same section for VIN 8...
#9
Re: 1990 Corvette Vacuum Hose and Cooling System Diagrams
Danspeed1
Posted on: 2014/10/23 3:43
Hose #5 is the one that is plugged off. Any idea where that would have gone and if it should be routed somewhere else or if it's ok plugged off?
#10
Re: 1990 Corvette Vacuum Hose and Cooling System Diagrams
Schrade
Posted on: 2014/10/23 13:59
"HOSE, PLENUM AIR BLEED"
???
I have no clue DS. Doesn't even look like a coolant line...
???
I have no clue DS. Doesn't even look like a coolant line...
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|