Milodon High-Flow Thermostat |
Subject: Milodon High-Flow Thermostat by joeld on 2017/4/7 22:55:13 Any experience, opinions, etc. with this product? I've never used one of this type, always the Stant Superstat. This will be for my 89 with a Edelbrock #8815 water pump. I installed this pump several weeks ago due to my original leaking out the weep hole. Temps were good with old pump, usually 194-200 at light cruise at 45-60 mph and in town also. Have a 195 thermostat now, with coolant fans set to run at 215*, off at 199*. After the Edelbrock install, temps are about 10*-20* warmer. Temps also spike quickly and go back down while just driving along normal. Did not do this before. Thanks Joel http://www.jegs.com/i/Milodon/697/16401/10002/-1 |