All Posts (redlite32)
Re: Gas Pedal Mount |
||
---|---|---|
Guru Newb
Joined:
2012/10/26 15:52 From Dowagiac Michigan
Posts:
4
|
That's one way to keep the mileage low!
Posted on: 2012/11/7 22:14
|
|
Transfer |
Re: C4 Gas Pedal Bracket Installation (1989) |
||
---|---|---|
Guru Newb
Joined:
2012/10/26 15:52 From Dowagiac Michigan
Posts:
4
|
Nice write up and thanks for the kind words Matt.
Spectator what are you needing to accomplish? It would not be too hard to make a special mount. Bill S. Unique Cutting & Metal Works
Posted on: 2012/11/7 22:11
|
|
Transfer |
Re: Gas Pedal Mount |
||
---|---|---|
Guru Newb
Joined:
2012/10/26 15:52 From Dowagiac Michigan
Posts:
4
|
Matthew,
Installation, verifying that you have closed throttle, open throttle and no chance of sticking or other safety issues. If that works for you, email your address and I will get it heading your way Monday. Thanks, Bill Unique Cutting & Metal Works
Posted on: 2012/10/27 2:28
|
|
Transfer |
Re: Gas Pedal Mount |
||
---|---|---|
Guru Newb
Joined:
2012/10/26 15:52 From Dowagiac Michigan
Posts:
4
|
Here's an update:
The V1 mount (85-88) is complete and on the shelf. $60 each. The V2 mount (89-91 is complete but not tested. The first V2 ordered is free if you can install right away, test and provide feedback. They will be $65 after verification. The V3 mount (92-96) is complete and on the shelf. $65 each. Shipping and handling via USPS is $10. Payment can be check, money order or Paypal. While we know what years the different assemblies should fit, it's hard to know if you have the original throttle pedal assembly in your car. It is possible that a previous owner or mechanic has swapped to a different version assembly. While it appears that different version assemblies will swap to different year cars, we know for sure that the V1 mount will not work with a V2 or V3 assembly. IF you suspect that your assembly may have been changed, I have a sheet that will help identify which mount you actually have. If you would like a copy of the sheet or have other questions, feel free to contact me. Bill Unique Cutting & Metal Works
Posted on: 2012/10/26 17:49
|
|
Transfer |