All Posts (c69vete)
Re: Alternate seat options for the C3 |
||
|---|---|---|
|
Guru Newb
 
Joined:
2009/2/19 0:21 From Kissinnee, Fl
Posts:
2
 |
I love the Fiero seats in my 69. These are out of an 85 but any will work. I kept the fiero tracks and modified them to fit the original seat bolt holes. Also added the speakers in the headrest and a single seatbelt pass thru slot per seat. Mr Mikes did the seat covers and I installed them. My car is also posted on his web site.
[IMG]http://i42.photobucket.com/albums/e323/c69vete/100_0544-1.jpg[/IMG]
Posted on: 2010/9/22 20:34
|
|
|
_________________
|
||
 Transfer
|
 
|
|
Re: Smarter strut rods |
||
|---|---|---|
|
Guru Newb
Joined:
2009/2/19 0:21 From Kissinnee, Fl
Posts:
2
|
Re: Smarter strut rods
That bracket looks great. Here is a modified stock bracket. It lowered the pivit point about 1" from the stock C-3 location. The old bracket shown for comparison is from a C-2. They were a bit higher yet than the C-3. It is laminated with stainless steel and drilled to accept a 5/8" bolt. No reducers. The spacers are 5/8" S/S nuts with the threads drilled out to fit the bolt. The nuts are stock width on the bracket end and .170" milled off each on the TA end. The rod ends are 5/8" X 5/8" and the rods are 13" long aluminum from Speedway. [IMG]http://i42.photobucket.com/albums/e323/c69vete/100_1406.jpg[/IMG] [IMG]http://i42.photobucket.com/albums/e323/c69vete/100_1402.jpg[/IMG]
Posted on: 2009/5/18 0:22
|
|
|
_________________
|
||
|
Transfer
|
|
|
