All Posts (skipmyles)
going to carb |
||
|---|---|---|
|
Guru Newb
 
Joined:
2011/7/31 19:46 From alabama
Posts:
4
 |
when instaling carb on an 85 vette does the ecm still control the guages and transmision was told the 85 did not have a lockout but dont know about the digital guages is there a kit that converts the system
Posted on: 2011/8/4 2:43
|
|
 Transfer
|
 
|
|
Removing 9th injector |
||
|---|---|---|
|
Guru Newb
Joined:
2011/7/31 19:46 From alabama
Posts:
4
|
would like to know more about removing the 9th injector I live in alabama and dont need to much of a warm up do you just unplug it or buy a plug kit
Posted on: 2011/8/3 2:06
|
|
|
Transfer
|
|
|
Re: ninth injector |
||
|---|---|---|
|
Guru Newb
Joined:
2011/7/31 19:46 From alabama
Posts:
4
|
have a new iac and have cleaned tb have set iac and tps plus timing have pulled neg cable and car runs great except when first cranked after shut down idles fine may pull iac and check length but it should be clean was wondering how long it took the ecm to learn new settings
Posted on: 2011/8/3 1:09
|
|
|
Transfer
|
|
|
ninth injector |
||
|---|---|---|
|
Guru Newb
Joined:
2011/7/31 19:46 From alabama
Posts:
4
|
hello
on my 85 when first cranked it will idle up to about 1300 rpm even when it gets to oper temp have to turn off then restart it will idle at 650 what cuts the warm up mode off is it the temp sensor at the front of block or what
Posted on: 2011/8/2 21:48
|
|
|
Transfer
|
|
|
