|
Register To Post |
Slalom4me | Head Location: Offset Dowel Pins | ||
Guru
|
Are offset dowel pins available for locating heads on SBCs?
If so, a link or name will be appreciated. Alternatively what remedial action is suggested for a block with a dowel pin that appears to be slightly miss-located on one bank. I would like to find some middle ground between using a large persuader and custom offset machining a single dowel or drilling and bushing. . |
||
Posted on: 2008/3/1 7:13
|
|||
Transfer |
CFI-EFI | RE:Head Location: Offset Dowel Pins | ||
Senior Guru
|
Summit has them. These are offset by [color=blue:8693b3f7fa].015"[/color:8693b3f7fa], and these are offset by [color=blue:8693b3f7fa].030"[/color:8693b3f7fa].
RACE ON!!! |
||
Posted on: 2008/3/1 23:51
|
|||
Transfer |
Slalom4me | RE:Head Location: Offset Dowel Pins | ||
Guru
|
Thank you CFI-EFI. I did not know these were available
commercially and they ought to be an ideal solution for the misalignment issue. Moroso Offset Cylinder Head Dowels "Improve your intake flow. These offset cylinder head dowels from Moroso reposition the cylinder heads upwards on the block toward the lifter valley. This moves the valves away from the cylinder wall for improved intake flow." OD (in): 0.316 in. Hgt(in): 0.629 in. #37920 - 0.015" Offset #37930 - 0.030" . |
||
Posted on: 2008/3/3 16:10
|
|||
Transfer |
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|