|
Register To Post |
jimmers | Cluster/Tach problem | ||
Senior Guru
|
Ever since I got my car the tach and oil pressure gauge hasn't worked properly. I got a whole new cluster thinking it would fix the problem but it hasn't. I've tried with and without the tach filter but nothing. Now I'm thinking it's a wiring issue. I tried to find in my FSM how the wire is ran but couldn't find anything. Where does the wire go from the distributor? Does it go straight to the tach on the dash? I'd like to run a new wire and see if thats the cause. Is the tach wire white all the way to the dash? Thanks!
|
||
Posted on: 2008/4/14 16:47
|
|||
Transfer |
jhammons01 | Re: Cluster/Tach problem | ||
Senior Guru
|
Look at this thread. It is not the same display issue as yours. However, the solution the he found may be what you need to try.
http://www.corvette-guru.com/modules/ ... php?topic_id=3268&forum=1 |
||
Posted on: 2008/4/14 18:04
|
|||
Transfer |
jimmers | Re: Cluster/Tach problem | ||
Senior Guru
|
Thanks for the reply, I'll check my grounds. I sure hope it's as easy as that.
|
||
Posted on: 2008/4/14 18:34
|
|||
Transfer |
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|