on both side of my rig the lower strip is missing the last screw on each side right in front of rear tire (cause it to hang a lil) question is : is there a nut er somthin in that lil humped part??? like i see id hafta pull inner fender well n then run a skeeroo down that way...but is there a nut or whats the way to bolt her back up ???? thanks pappy

I've removed those, I think I had to remove the rear fender liner partway to get to that screw. And even then you'll need a 1/4" drive with a wobbly or ujoint.

I think they're 8mm, its sort of hidden in a pocket back there.

thanks cc...so there is a built in nut of some sort in the lower panel?

ok that lil bump in there is simply a solid spot fer a skeeroo to thread into heyhuh,,,well thanks again ill hafta smoosh my hand in there this wkend n git er done

If you mean the rocker panels under the doors they use what is known as a 'bathtub insert' and a small screw to secure the lower edge of the rocker panel to the frame. They are available about any auto parts store, look in the 'help' section.

well got my rocker panels snugged up in rear... maybe mines different cause it was simply a thinker spot molded in n took a skeerrooo just like the fender wells etc....