Need some advice on brake pads for my 89 just would like something stock would the AC Delco pads be good for my 89.

OK I have a 89 what are some of the parts that I should start stocking up for this year model for the future?

How many of you guys here drive your C 4 on a daily basis ?

so if I use this to get the heavy grease off just be sure I dont get it on the springs.

Can I use this on a C 4 to clean under the car? it will not harm the springs?

Restoring/cleaning up Aluminum Suspension Parts anyone know of good products to use on the parts to get them looking new>

OK, now we got the bushings out of the way. what would be a good source for the U joints and the bearings? brands please.

the first time I had it judged it scored a 93. just missed top flight. it was a chapter but this chapter judges hard so that if you took it to a regional you would not be shocked to find you had a 3 flight car. took a lot of hits for small things like hoses belts tires ect the old car is tight. I had a things like gates belts hoses BF Goodrich tires that more or less just picked me to death on the small stuff it adds up in this game.

around 150 k
might just have to take the hit. but I am also thinking that it might not ride good with out rubber?

I guess I am SOL, lol looks like the NOS stuff is even dried up. OK on the rebuild would like to go back as close to stock and not spend stupid money on items who has the best U joints and bearings for a rebuild?

need something in a kit that would pass NCRS or bloomington gold. that looks stock

I would like to rebuild my 89 with all new bushings and use what was OEM the rubber. I have not found a source for those, do they only make poly for the C 4 cars? If I go with that how much diffrent will the ride an the look of the bushings once in the car?

How hard are they to change on the C4 and can you recomend a brand to get?

How can one tell if the rear bearings are going out?

I guess, I will give it a try. I like you think the glass cleaner is great. I like the trim shine on the black trim an it is really good.

Has anyone used the wax from Stoner called speed bead?

Found a new one for 90 bucks.

Yeah, what kind of sticker shock?

Has my relay gone bad? When I turn off the car the blower stayed on last night, I have a kill switch on the battery so I was able to turn it off with that.

NCRS could and is wrong some times, it is like climbing a mountain what is the point. Because its there, same as going for a NCRS award because its the mountain of the corvette restoration world that few people understand.

Anyone have some nice used OEM black floor mats for a 1989 car they would like to part with?

They repop the stickers for the 89. I would just like a case for some referance.

Looking to see if anyone has a old 1989 delco freedom they would like to sell.

Looking for a set of wiper blades that have the ends that look like a arrow tip. These would be the OEM that came on early C 4 cars.

The little light under the spare was a nice surprise lol, and one of my side marker lights went out. I drive my car and on the way over it might have gone out. I had no idea that the car had that little light on it, and of course it was out. I had fun and learned a lot about my car. And should be able to get it to top flight after the fixes from my judging sheets.

How hard is this thing to change out, I had one done on my C 3 and it was a bitch! I am thinking this will be just as bad if not worse to change?

Could the master cylinder if it was bad, make the pedal have a hard feel?

Well I think my brake booster went out yesterday got in an started the car backed it out of the garage an the pedal is like a rock.

Yes, I lost most of points for bulbs that burnt out an for lights that I did not even know that were on the car not working.

Yes, I need them for flight judging.

Yes, I need them for flight judging.

Well at my first chapter meet I made second flight.

Looking for some nice used or NOS headlights with the word GUIDE in the center of the headlight bulb.

The weatherstripping that is on the door next to the door panels I think is my problem , they look good but they must be letting water into the door and then it is coming through the lower carpet on the door and soaking the door seal carpet. Do the doors on a C 4 have a lower drain for water intrusion into the lower part of the doors? Are do they just have a plastic sheet on the inside of the door to keep water out?

Yes, I put them on at the same time.

Has anyone had a issues with the replacement carpet from Mid America ? One problem is with the door seal carpet, an the doors not shutting good.

Yes it is on both sides of the car. I put new door weather stripping on the doors. I am not sure where it is coming in all the other weather stripping looks to be in good shape.

My car has a water leak some where and it is soaking the carpet on the door panels and the carpet that is on the very high door seals on a C 4. Any idea where this water could be coming from?

what do I need to do to disable the low tire sensors on my car? If I just take them out of the wheels what else do I need to do to keep the light off on the dash?

what bulbs go behind the panel with the switches that go from english to metric?

they were not AC Delco?

any one know the part numbers for the bulbs that light up the dash on a 1989?

my car came with the engine oil cooler. at some point in its life some one took off the heater hoses that came with that option. and now it just has regular heater hoses on it. should I go back with the right ones that came on the KC 4 option and set it back up, or just leave it like it is set up now?

front license filler panel
how does that fit on the car, other than the two tabs at the top what holds it on?

so the standard for 89 is the same all the way through 93. thanks

anyone know what is diffrent about the 89 90 seats covers to the 91 93?

it has the brackets, the price is 450 for the top. but shipping is high on the because of crating ect.

do I need the brackets?

going to buy a hardtop for my 89. found a used one that I think came off a later year model. what do I need to do to my car to make it work on my 89. will it just fit, or do I need to do some things to my car that will let a hard top fit on a covertible?

Thanks, just what I was looking for!

How does the seat come out on the 1989 cars. I will just buy the seats already on mounted on foam. anyone have something that shows how they come out and go in? thanks